Cleaning The Appliance; Cleaning The Ventilation Grille; Removing The Fittings - Siemens G UD Serie Gebrauchsanleitung

en Cleaning and servicing

Cleaning the appliance

Clean the appliance as specified to
ensure that it is not damaged by in-
correct cleaning or unsuitable clean-
ing products.
WARNING
Risk of electric shock!
¡ An ingress of moisture can cause
an electric shock.
Do not use steam- or high-pres-
▶
sure cleaners to clean the appli-
ance.
¡ Liquid in the lighting can be dan-
gerous.
The rinsing water must not run
▶
into the light.
ATTENTION!
¡ Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
Do not use hard scouring pads
▶
or cleaning sponges.
Do not use harsh or abrasive
▶
detergents.
Do not use cleaning products
▶
with a high alcohol content.
¡ If you clean fittings and accessor-
ies in the dishwasher, this may
cause them to become deformed
or discolour.
Never clean shelves or contain-
▶
ers in the dishwasher.
Prepare the appliance for cleaning.
1.
→ Page 41
Clean the appliance, the fittings
2.
and the door seals clean with a
dish cloth, lukewarm water and a
little pH-neutral washing-up liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
→ Page 35
42
Switch on the appliance.
6.
→ Page 37
Putting the food into the appliance.
7.

Cleaning the ventilation grille

Remove the ventilation grille for
1.
cleaning.
To do this, depress the clips in
‒
the ventilation openings and
simultaneously remove the vent-
ilation grille forwards.
→ Fig.
3
Clean the ventilation grille with
2.
lukewarm soapy water and a dish
cloth.
Let the ventilation grille dry com-
3.
pletely and insert it.

Removing the fittings

If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the frozen food container
Take out the frozen food container
1.
as far as it will go.
Lift the frozen food container at the
2.
front and remove it ⁠ .
→ Fig.
4