Troubleshooting - IKEA UPPLEVA Handbuch

http://ikea-club.com.ua

7 Troubleshooting

If you experience any of the following
difficulties while using this unit, check the
list below before consulting your nearest
dealer.
Problem
•
No reaction
to the remote
control.
•
No audio / video
signal on the
display device
via HDMI cable.
•
No high-
definition video
signal on the TV.
•
No audio
signal from the
loudspeakers
of the audio
system.
•
No sound from
TV.
•
Cannot play
back a disc.
•
Cannot play
back JPEG files
from a disc.
•
Cannot play MP3
files from a disc.
•
Cannot find a
JPEG file.
Tip

Connect the product to the power outlet.

Point the remote control at the product.

Insert the batteries correctly.

Insert new batteries in the remote control.

If the unit is connected to the unauthorized display device with
an HDMI cable, the audio/video signal may not be output.

Does the disc contain high-definition video? High-definition video
is not available when the disc does not contain it.

Does the TV support high-definition video? High-definition video
is not available when the TV does not support it.

Turn on the audio system.

Set the audio system to the correct external input.

Increase the volume level of the audio system.

Check if HDMI ARC
HDMI ARC connector of TV.

Make sure that the BD player supports the disc.

Make sure that the Blu-ray Disc player supports the region code
of the DVD or BD.

For DVD+RW/+R or DVD-RW/-R, make sure that the disc is
finalized.

Clean the disc.

Make sure that the disc was recorded in the UDF, ISO9660 or
JOLIET format.

Make sure that the disc was recorded in the UDF, ISO9660 or
JOLIET format.

Make sure that the bit rate of the MP3 files is between 112 and
320 kbps.

Make sure that the sample rate of the MP3 files is 32kHz,
44.1kHz or 48kHz.

Make sure that the selected group (folder) does not contain more
than 9,999 files for DVD, and 999 files for CD.

Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
connector of sound system is connected to
16