Connect Usb Device; Connect Media Player; Connect The Speakers; Connect The Wireless Subwoofer - IKEA UPPLEVA Handbuch

http://ikea-club.com.ua
Connect the audio cable from the analogue
AUX IN connectors on this product to the
audio OUT connectors on the TV or other
device. After aux in connected, you should
press SOURCE button on the remote control
to switch to the aux in mode.

Connect USB device

A USB device provides an additional memory
to software upgrade and enjoy BD-Live
bonus content.
Connect the USB Flash device to the USB
connector on this product.
Notes:

When connect a USB Flash device, press
TEXT/MEDIA CENTER on remote control
to select USB to play.

Connect a USB Flash device only to the
USB connector on this product.

When you enjoy BD-live bonus content,
as your local storage, use a 1 GB or
larger USB memory.

Connect media player

Media player
Connect an media player (such as MP3
player/CD player) to the AUDIO IN
connector. After media player connected,
you should press SOURCE button on the
remote control to switch to the audio in
mode.

Connect the speakers

Connect the speaker cables from the right
speakers to the SPK_R connectors on the
rear panel of the player.
Note:

Match the + and - marks on the
connectors when connecting the speaker
cables.

Connect the wireless subwoofer

1. Connect the power cable from the player
to the wall socket and press power key
to power on.
2. Connect the power cable from the
wireless subwoofer to the wall socket.
The standby indicator will light slightly.
3. Press the MENU button on the remote
control, and press 1, 2, 3 and 4. Text
"Sub Check ID" displays on the display
panel of the player and the standby
indicator on the subwoofer flashes.
4. Press and hold the
on the back of the subwoofer for 3
seconds. The standby indicator will light
if the subwoofer is connected to the
player successfully.
Notes:

If devices such as micro-wave oven,
wireless network card or bluetooth
device, or any other devices that use
the same frequency (2.4GHz) are used
near the system, snatchy sound may be
heard due to interference.

The transmission distance of wireless
electric wave is about 10m, but may vary
according to the operation condition.
If there is reinforced concrete wall or
metal wall between the main unit and the
wireless subwoofer, they may connect
unsuccessfully because wireless electric
wave cannot penetrate through the metal.

Do not place the subwoofer upside
down, otherwise objects may fall into the
subwoofer from the hole at the bottom
side and touch electric parts.

Do not touch the cloth on the front of
the subwoofer with any objects to avoid
damage.
•
The product is ready to be set up for use.
Notes:

Before connecting the AC power cord,
ensure you have completed all other
connections.
12
(ID learn) button