Noise & Vibration; Care & Maintenance; Replacement Parts - Pattfield E-ARM 3440 Li Bedienungsanleitung

Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN ISO 3744:1995 and ISO 11094:1991 and
can be used to compare appliances.
It may be used for a preliminary assessment
of exposure.
Care & Maintenance
Caution! Make sure the appliance is
switched off and the batteries are
removed.
- Always keep the appliance clean, dry and
free of oil or grease.
- Wear safety glasses and gloves to protect
your eyes and hands whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check for obvious defects and/or
damaged components.
- Periodically check all fixings. These could
become loose with time due to vibration.
- Check the collection bag regularly for signs
of wear.
- The most used part is the blade. Inspect the
blades regularly:
- If the blade is worn or blunt, it must be
replaced immediately.

Replacement parts

Please quote the following data when ordering
replacement parts:
- Type of machine
- Article number of the machine
- Identification number of the machine
- Replacement part number of the part re-
quired
Warning! The vibration emission
during actual use can differ from the
declared total value depending on the use
of the appliance.
- If the appliance starts to vibrate exces-
sively, the blades seem to be unbalanced
and must be replaced.
- Replace any worn or damaged parts.
- If the body of the appliance needs cleaning,
wipe it with a brush or a soft damp cloth. A
mild detergent can be used but nothing like
alcohol, petrol or similar cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Store the battery and the appliance sepa-
rately.
- Charge the battery before storing the appli-
ance in winter.
- Store the appliance in a dry and frost-free
place (10-25 °C).
EN 121