GPO Rydell Radio Bedienungsanleitung Seite 8

3. In Main menu. Use the UP/DOWN button to select time setup and
4. In Time setup menu , Use the UP/DOWN button to select set clock
5. In Set clock menu, the hour begin to flash and you can press
6. The minute flashes and can now be set, and then short Press AUTO
Note: In time setup menu, you can set clock,date,auto update,12/24
Automatical setting
1. In DAB mode, Press the SETUP button until the DAB menu is
2. Press the UP/DOWN button to select Main menu and short Press
3. In Main menu. Use the UP/DOWN button to select time setup and
4. In Time setup menu , Use the UP/DOWN button to select Auto
5. In Auto update menu, use the UP/DOWN button to select from radio.
ALARM 1 SETTINGS
1. In FM or DAB mode, Press the SLEEP/SNOOZE/ALARM button until
2. Press the UP/DOWN button to select alarm1 and short Press AUTO
3. In alarm detail menu. Use the UP/DOWN button to select time and
4. The hour begin to flash and you can press UP/DOWN button to set.
5. The minute flashes and can now be set, and then short Press AUTO
8
GPO_Rydell_DAB_EU_Manual.indd 8
Downloaded from www.Manualslib.com
short Press the AUTO SCAN/ENTER to confirm.
and short press the AUTO SCAN/ENTER to confirm
UP/DOWN button to set. Press the AUTO SCAN/ENTER to confirm.
SCAN/ENTER button to confirm.
hour following the same operation.
shown.
AUTO SCAN/ENTER to confirm
short Press the AUTO SCAN/ENTER to confirm.
update and short press the AUTO SCAN/ENTER to confirm
the Alarms menu is shown.
SCAN/ENTER to confirm
short Press the AUTO SCAN/ENTER button to confirm.
Press the AUTO SCAN/ENTER to confirm.
SCAN/ENTER button to confirm.
manuals search engine
6. Ba
and
act
Note:
ALAR
1. In F
the
2. Pre
SC
3. In a
sho
4. The
Pre
5. The
SC
6. Ba
and
SCAN
Note:
Note:
alarm
listen
SHUT
To ca
stop t
TO TU
Short
SCAN
mode
AUTO
28/09/2016 08:50