AQUARK AQUA FORTE MR.SILENCE SC948 Benutzerhandbuch Seite 94

----------------------------------------------------------------------------------------------------------------------------------------
Failure
Heat pump doesn't run
Fan running but with
insufficient heating
Display normal, but no heating
If above solutions don't work, please contact your installer with detailed information and your model
number. Don't try to repair it yourself.
Note: If the following conditions happen, please stop the machine immediately, and cut off the power
supply immediately, then contact your dealer:
3. Inaccurate switch action.
4. The fuse is frequently broken or leakage circuit breaker jumped.
Protection & Failure code
Reason
No power
Power switch is off
Fuse burned
The breaker is off
evaporator blocked
Air outlet blocked
3 minutes start delay
Set temp. too low
3 minutes start delay
15
Solution
Wait until the power recovers
Switch on the power
Check and change the fuse
Check and turn on the breaker
Remove the obstacles
Remove the obstacles
Wait patiently
Set proper heating temp.
Wait patiently