Main Components; Operation - SOLAC BA5500 Gebrauchsanleitung

• E N GL IS H
CAUTION
• Read these instructions switching on your appliance.
• Check that the voltage stated on the nameplate matches that in your
home.
• NEVER put the main body of the blender into water.
• Do not use the appliance if the cord is in poor condition. If so, take it to an
authorized distributor to have it inspected and repaired, as special tools are
needed for its replacement.
• Unplug it when not in use and before fitting or detaching the different
parts of the appliance.
• This appliance is designed for intermittent use. It may be used continuously
for 10 minutes in positions 1 to 5 (mixing and blending rods). In the turbo
position it may only be used for a maximum of 30 seconds. After this, let
the motor cool down.
• Keep out of the reach of children.

MAIN COMPONENTS

1.- Main body
2.- Rod attachment holes
3.- Rod ejection control
4.- TURBO button
5.- Speed selector
6.- Support base
7.- Blender rods
8.- Mixer rods

OPERATION

A.- Rod attachment
• Before plugging the appliance into the mains, couple the attachments ac-
cording to the type of mix you want:
5500 BATIDORA 7
7 7
20/1/04, 15:13:53