Connecting The Soundbar; Connecting Electrical Power - Samsung HW-NW700 Bedienungsanleitung

03 CONNECTING THE SOUNDBAR

Connecting Electrical Power

Use the power components (1, 2) in the following order to connect the Soundbar to an electrical outlet:
1 Connect the power output cable to the power adapter, and then to the Soundbar.
2 Connect the power cord to a wall socket.
See the illustrations below.
• For more information about the required electrical power and power consumption, refer to the
label attached to the product. (Label : Bottom of the Soundbar Main Unit)
2 Power Cord
Connecting
Electrical Power
1 AC/DC Adapter
DC 23V
DIGITAL AUDIO IN
(OPTICAL)
WIRELESS
DC 23V
Rear of the Soundbar
Main Unit
ENG - 9
• Make sure to rest the AC/DC
Adapter flat on a table or the floor.
If you place the AC/DC Adapter so
that it is hanging with the AC cord
input facing upwards, water or
other foreign substances could
enter the Adapter and cause the
NETWORK
Adapter to malfunction.