LG Power Tank PMC-1000 Bedienungsanleitung Seite 8

Sequential Charging
1. C onnect the Micro USB port (Input) of the portable charger and the
charger adapter by using the USB cable.
2. C onnect the USB port (Output, Port A) of the portable charger and the
USB port of your portable device by using the USB cable.
-
A fter finishing the portable charger charged, then your portable
device will be charged.
-
W hen you press LED button, after finishing your portable device
charged, then the portable charger will be charged.
Depending on Portable device, charging process might not stop
even though battery is fully charged (100% charged). In this
case, it will be not switched to charging the portable charger. In
order to change the sequence for charging the portable charger,
please wait for some time(it may different depending on device's
manufacturer.) or disconnect the portable device from portable
charger.
3. When charging of portable device is done, remove the USB cable.
* If simultaneously charging the mobile device and portable charger,
connect the portable charger's USB output port (1, Port B) to your
mobile device's USB port.
, NOTE
• When sequential charging function is operated, charging current will be
limited. Thus, it may take longer to charge.
• This function is recommended to use genuine charger. If you charge by using
USB port in PC, it may not be charged.
7