Sony BKMW-E3000 Bedienungsanleitung Seite 5

Overview
The BKMW-E3000 is a network interface board for
installation in an MSW-2000-series digital videocassette
recorder. With this board installed, the VTR can be added
to a 10/100/1000Base-T network to transfer video, audio,
and metadata as MXF files. You can use MXF data
received over the network to record video, audio, and
metadata to cassettes. MXF (Material Exchange Format) is
a file format that stores video, audio, and metadata in a
single package. It enables communications between
network devices such as VTRs and servers.
Using the Application
Software
By installing the supplied application software "e-VTR
Manager" in a PC, you can control the VTR from the PC.
System requirements
Install e-VTR Manager in a PC meeting the following
requirements.
e-VTR Manager may not perform normally if installed in
a PC that does not meet these requirements.
CPU: 1 GHz or higher
Memory: 256 MB or greater
OS: Windows XP/2000
DirectX 8.1lb or higher
Language: English
Available hard disk space: 5 MB or more
Monitor resolution: XGA (1024 × 768) or more
recommended
To install the software
1
Insert the CD-ROM in the drive of your PC and
double-click on Setup.exe.
2
Perform the installation, following the instructions of
the Wizard.
To start e-VTR Manager
Double-click on the e-VTR Manager icon on the desktop.
For details, refer to the Operation Manual contained on
the enclosed CD-ROM.
Overview / Using the Application Software
5