General Safety Instructions - BOMANN cb 1410 Bedienungsanleitung

43358-05-CB 1410
GB
• Before commissioning this device please read the instruction manual
carefully.
• Please keep these instructions, the guaranty certificate, the sales receipt and, if
possible, the carton with the inner packaging!
• The device is intended exclusively for private and not for commercial use!
• Always remove the plug from the socket whenever the device is not in use, when
attaching accessory parts, cleaning the device or whenever a disturbance
occurs. Switch off the device beforehand. Pull on the plug, not on the cable.
• In order to protect children from the dangers of electrical appliances, never leave
them unsupervised with the device. Consequently, when selecting the location
for your device, do so in such a way that children do not have access to the devi-
ce. Take care to ensure that the cable does not hang down.
• Test the device and the cable regularly for damage. If there is damage of any
kind, the device should not be used.
• Do not repair the device yourself, but rather consult an authorised expert.
• For safety reasons a broken or damaged mains lead may only be replaced by an
equivalent lead from the manufacturer, our customer service department or a
similary qualified person.
• Keep the device and the cable away from heat, direct sunlight, moisture, sharp
edges and suchlike.
• Never use the device unsupervised! Switch off the device whenever you are not
using it, even if this is only for a moment.
• Use only original accessories.
• Do not use the device outdoors.
• Under no circumstances must the device be placed in water or other liquid, or
come into contact with such. Do not use the device with wet or moist hands.
• Should the device become moist or wet, remove the mains plug from the socket
immediately. Do not reach into the water.
• Use the device only for the intended purpose.
• The kitchen balance was developed to display the weight of food and ingre-
dients.
• Place the balance on a hard and level base.
• Check the 0 position: the arrow must coincide exactly with the 0 mark when the
balance is empty. If this is not the case, adjust the arrow position by turning the
adjustment knob located on top of the balance.
• Lay the object to be weighed in the scale pan. When the arrow stops moving,
the weight can be read on the dial.
• Do not dip the balance in water.
• Handle the balance with care. It is a precision measuring instrument. Do not
make it fall and do not load it beyond the maximum weight.
14
27.06.2002 17:09 Uhr

General safety instructions

Use
Seite 14