Notes On Camera Installation - Reolink Go PT Handbuch

Set up Camera on Reolink App (For Smartphone)
Download and install the Reolink App on App Store (for iOS) and Google Play (for Android).
Available on the Get it on
1. Please click the " " button on the top right corner to add the camera.
2. Scan the QR code at the bottom of the camera and follow the steps to complete the setup.
3. After creating a password for your camera, please follow the steps to sync the time. Then, you
can start the live view or go to "Device Settings".
7 English
Battery Status
Menu
Add New Device
Enable/Disable PIR
Motion Sensor
(In default, the PIR sensor
is enabled.)
Device Settings
Access the Live View

Notes on Camera Installation

In order to maximize the waterproof performance and the PIR motion
sensor's efficiency, you'd better install Reolink Go PT upside down only
when mounting it up outdoors.
Find the Best Spot for the Camera
Please install the camera 2-3 meters (7-10 ft)
above the ground. The detection range of the
motion sensor would be maximized at such a
height.
For effective motion detection, please install the
camera angularly and the angle between the PIR
sensor and the detected object must be larger
than 10°.
NOTICE: Due to the limitation of PIR sensor
detection, if a moving object approaches the PIR
sensor vertically (the direction of the orange
arrow in the image), the camera may fail to
detect motion.
A
B
Mounting Height:
2-3 meters
PIR Detecting Disance:
2-10 Meters
θ
English 8