App Control - UltraMedia MSat-65 Bedienungsanleitung

TROUBLESHOOTING
- Error-12 (LED Astra2, Astra 3 light up + alarm tone):
Elevator motor overcurrent. Check whether an obstacle is preventing the
antenna from moving.
- Error-13:
Antenna cannot find a satellite. Check whether an obstacle (tree, house) is
preventing reception.
NOTE: When the 12V voltage is applied to the contact cable (blue), the alarm sounds
three times and the antenna closes.

APP CONTROL

APP INSTALLATION
1. Download the [MotosatRC] app from the "AppStore" or "GooglePlay".
2. Follow the instructions.
CONNECTION TO THE CONTROLBOX
1. Press and hold the [Standby] button until you hear a "beep" to put
the device into pairing mode.
2. Open the "MotosatRC" app and wait until the "control box" is
recognized.
3. Confirm the entry to connect the devices.
Note: The connection process only needs to be done the first time.
Standby Button