Samsung 5+ Serie Bedienungsanleitung Seite 13

Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly,
you must first attach a "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold
separately) to either the USB 1 (HDD)
The LAN Port on
the Wall
Samsung's Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce sites and
Samsungparts.com. Samsung's Wireless LAN adapter supports the IEEE 802,11a/b/g and n communication
protocols. Samsung recommends using IEEE 802,11n. When you play the video over a IEEE 802,11b/g
connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network
through an access point or AP (typically a wireless IP Sharer) to transmit an encrypted security code called an
access key.
If Pure High-throughput (Greenfield) 802,11n mode is selected and the Encryption type is set to WEP, TKIP or
TKIP AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup.
They are illustrated below:
The Modem Port on the Wall
The LAN Port on the Wall
✎
It is not supported when the network speed is under 10 Mbps.
Network Connection
or USB 2 port on the back of your TV. See the illustration below.
Wireless IP sharer
(AP having DHCP server)
LAN Cable
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
LAN Cable
English - 13
TV Side Panel
or
Samsung Wireless
LAN Adapter
TV Rear Panel
LAN Cable
TV Rear Panel