Epson ELPIF03 Bedienungsanleitung Seite 5

Special techniques are required to install or remove this product, so make sure you
•
contact a specialist or your local dealer. Otherwise, unexpected malfunctions could
occur due to static electricity and so on.
This product has been designed for exclusive use with Epson projectors. Before in-
•
stalling this product, check the projector's model number. If this product is installed
on anything except for the speci ed projector, it may cause damage to this product
or the projector.
• When installing/removing this product to/from the projector, be careful not to
injure yourself on the edge of the product or the edge of the slot.
Do not use or store in places where the product might be subjected to high and
•
low extremes of temperature. Also, avoid any sudden changes in temperature.
• Do not store this product within reach of children. There is a risk of children swallow-
ing screws or them getting stuck in the throat. If any screws are swallowed acciden-
tally, contact a doctor immediately.
• Make sure that no dust or trash enters the slot when installing this product. If dust
or trash enters the projector, it could cause a malfunction.
Do not touch the connectors on this product with your hands. If this product is
•
damaged by static electricity it will not operate correctly. Make sure you discharge
any static build up before handling this product.
After removing this product from the projector, store it in an anti-static bag.
•
When cleaning this product, do not use a wet cloth or solvents such as alcohol,
•
benzene, or thinner. Doing so could cause an electric shock or malfunction to occur.
Caution
中
文
简
体
中
文
繁
體
5