Werbung
This product must be installed professionally and in accordance
with the prescribed assembly guidelines. It must only be assem-
bled by qualified and trained experts.
Intended use
Water meters are for recording the consumption of
drinking water. Depending on their design, they are for
measuring warm or cold water. Water meters must be used ex-
clusively for this purpose.
Any use other than the use described previously and any chan-
ges made to the device constitute improper use. Uses and
changes must be queried in writing beforehand and are subject
to special approval. The installed meter is a pressurized compo-
nent. There is a risk of persons suffering scalds from hot water.
Warranty and guarantee
Warranty and guarantee claims are only valid if the parts in
question have been used in accordance with their intended use
and if the technical requirements and any applicable technical
regulations have been observed.
Safety notes
• The installed meter is a pressurized component. There is a
risk of persons suffering scolds from hot water.
• The dimensions and thermal loads of seals must be approp-
riate for their application. You should therefore only use the
seals delivered with the device.
• Observe the max. tightening torque of 30 Nm
Correct disposal of this product
For the purposes of disposal, the devices are considered used
electronics devices in the sense of the European Guideline
2012/19/EU and must not be disposed of with household waste.
• Dispose of the device through the appropriate channels.
• Please note the local and currently valid legislation.
Siemens Building Technologies
20.03.2015
CE1M5327xx
en
3
Werbung
