Initial Use; Operation - Beurer WL 32 Gebrauchsanweisung

Display description
1 2 3
10
9
8
7
1 Radio memory space
2 Light symbol
3 Snooze
4 Radio on
5 Alarm 2 radio
6 Alarm 2 beep
7 Alarm 1 radio
8 Alarm 1 beep
9 Displays time in 12h format
10 Sleep timer (goodnight function)
4
5
6

5. Initial use

• Remove the packaging material.
• Check that all parts listed are present.
• Check the device, mains adapter and mains cable for
damage.
• Remove the battery compartment lid on the underside of
the device and insert the batteries with the correct polar-
ity. The batteries supply power to the device in the event
of a power failure.
• Place the device on a firm, even surface.
• Insert the mains adapter connector into the mains adapter
socket on the rear of the device.
• Insert the mains adapter into a suitable socket. The time
is shown on the device display.
Note
• If you would like to reset the device to the factory set-
tings, press in the reset button on the underside of the
device using a pointed object.

6. Operation

Note
The device exits the settings menu automatically if no but-
ton is pressed for 10 seconds.
6.1 Setting the time and snooze duration
• Press the button.
The time will start to flash.
Using the  /  buttons, select the desired time.
18