COLPHARMA Air 100 Bedienungsanleitung Seite 15

HOW TO PREPARE AND USE THE DEVICE
When using the device for the first time, make sure to clean all parts as described in the section "Cle-
aning and Disinfection".
1. Open the nebulizer (9) and pour in the amount of medicine as prescribed by the physician. Make
sure not to pass the maximum level mark (Pic. 2/A).
2. Choose the most suitable inhalation accessory, as prescribed by the physician (Pic. 2/B).
3. Connect the nebulizer to the compressor using the air tube (Pic. 2/C) and plug in the power cord in
an electric outlet making sure that the supply voltage is in compliance with what is stated in this
manual or the device nameplate.
4. Press the ON/OFF (2) button to turn on the device. Place the mouthpiece in the mouth (8), let the
nose piece rest (10) under the nostrils or the mask (6 or 7) on the face making sure to cover mouth
and nose.
5. Sit in a relaxed position with the upper body straight.
Do not lie down while inhaling.
6. After having completed the therapy session as recommended by the physician, press the ON/OFF
(2) button to turn off the device and unplug the power cord from the electric outlet.
7. Make sure that the air tube contains no condensation. In case of condensation, switch on the
device to dry up any moisture in the tube and then disconnect it as described above.
8. Empty out the remaining medicine from the nebulizer and clean the device in all of its parts, as
described in the section "Cleaning and Disinfection".
This device has been designed to work 20 min. ON / 40 min. OFF.
Do not cover the device with a cloth, towel or anything else when in operation to avoid overhea-
ting or malfunction of the device.
15