Connect The Units To The Power Supply Distributor - Oase InScenio FM-Master EGC Gebrauchsanleitung

The correct fastening of the plug connector is important for a secure connection and
an interference-free EGC network.
• The EGC connection cable is available as an accessory in the lengths 2.5 m (47038),
5 m (47039) and 10 m (47040).
– The EGC connection cable and the connection cable of the InScenio FM-Master
EGC are connected to the EGC cable connector. (47788).
• Ensure that on EGC-OUT of the last unit in the EGC network, the terminal resistor
EGC is installed instead of an EGC connection cable, to ensure that the EGC net-
work is closed off properly.

Connect the units to the power supply distributor

NOTE
Ensure that the total outlet output of 16 A (2700 W) is not exceeded. Otherwise the

unit will be damaged.
Never connect a transformer to the outlet with the dimmer function. Otherwise

the unit will be damaged.
1 Socket 1, switching function (max. 12 A / 2000 W)
2 Socket 2, switching function (max. 12 A / 2000 W)
3 Socket 3, switching function (max. 12 A / 2000 W)
4 Socket 4, switching and dimming function
(40 W ... 320 W)
EN
EGC0009
EGC0003
23