Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
protect.SIS
Intended purpose
The protect.SIS is a shoulder joint support. The product is exclusively to be
used for the orthotic fitting of the shoulder and only on intact skin.
Indication
• Shoulder dislocation
• Immobilisation of the acromioclavicular joint
• Sprain
• Injury of the rotator cuff
• Immobilisation of arm fractures
Contraindications
None known at present.
Fitting instructions
• Please wash before first use.
• Wrap the longer strap around your body and fasten it just below the
breast. The strap sewn to the brace must be on the injured side, and the
thin strap with the loop for your hand must be at the back.
• Fix the injured arm with the strap around your upper arm.
• Pass the thin strap up over the healthy shoulder. Slide the hand of your
injured arm through the loop.
• After adjusting the length of the strap with the hand loop fix the hand
loop to the breast belt with the hook and loop strip.
Care instructions
Hook and loop fasteners should be closed for washing. Soap residues,
lotions and
ointments can cause skin irritation and material wear.
• Wash the product by hand, preferably using a medi clean detergent, or
in delicate cycle at 30°C using a mild detergent without fabric
conditioners.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
Storage instructions
Please keep the brace in a dry place and do not expose it to direct sunlight.
Material composition
Polyamide, PU, polyester, cotton
Werbung
