Setting Date; Selecting A Device Connected To The Brink Air Control; Description Of Operation; Manner Of Use; Navigation: General Description - Brink Air Control Gebrauchsanweisung

3.2.3 Setting date

You can set the date. The date is visible on the main screen.
Perform the following actions to set the date(see
Press return
main screen
Press . 'Main Menu' opens
1
Select 'Basic Settings' by turning
Press . 'Basic Settings' opens
1
Select 'Date' by turning
Press . 'Date' opens
1
Change the day by turning
Press
1
Repeat the previous two steps for both the months and
the year
Press return
main screen
3.2.4 Selecting a device connected to the Brink Air
Control
You can choose the device you want to regulate with the
control if multiple devices are connected to Brink Air Control.
Proceed as follows to set the appliance selection
):
13
Press return
main screen
Press 1 . 'Main Menu' opens
Select 'Installer' by turning
Press 1 . 'Installer' opens
Select 'device' by turning
Press 1
If only one appliance is connected, no choice is offered and
only HRU appliance is displayed.
4 Description of operation: manner of use
You can increase or decrease the ventilation mode with the
Brink Air Control. You can do this by setting a program. You
can temporarily override the program while it is running.

4.1 Navigation: general description

Navigating through menus
The Brink Air Control has menus that you can navigate
through. For this you use navigation button
scroll through the menus by turning the navigation button
(see ). You can open a selected menu-item by pressing the
9 B
navigation button(see
Return to the main screen
The main screen (see
You can always return to the main screen by pressing on the
info button (see
2
need to press return depends on how deep you have gone
into the menu. U need not be afraid of pressing return too
frequently.
4.2. Selecting a device connected to the Brink Air
Control
You can choose the device you want to regulate with the con-
trol if multiple devices are connected to Brink Air Control. See
§ 3.2.4.
Downloaded from www.Manualslib.com
as many times as necessary to get to the
2
1
1
as many times as necessary to get to the
2
2 as many times as necessary to get to the
1
1
1
).
9 A
) is the Brink Air Control's start screen.
2
) a few times. The number of times you
1
manuals search engine

4.3 Weekly programmes: P1, P2 and P3

You can programme the regulation of the ventilation mode in
& ): a weekly program. You can choose from programs P1, P2 and
,
1 9 12
P3.
Program P1
With this you create a day program for every day of the week.
Program P2
With this you create two day programs. One day program
for weekdays 'mo-fri' and one day program for the weekend
'sa-su'.
Program P3
With this you create seven day programs. Separately for every
day of the week.

4.3.1 Standard settings P1, P2 and P3

The Brink Air Control has standard set weekly programmes.
1
(see & 4.3.2 Creating a P1 program (see
Press return
main screen
Press
3
Select 'P1: week' by turning
Press
1
You have a choice from 'Period 1', 'Period 2', 'Period 3', 'Period
4', 'Period 5' and 'Period 6'. Every period is a part of the day in
which you can set a ventilation position.
Perform the following actions to set period 1:
Select 'Period 1' by turning
Press
1
Select 'Start Time' by turning
Press
1
Change the start time by turning
You have a range of between 3.00u and 2.59u
If in a period the time is turned back so far that lines
appear, that period and the one above it will be deleted.
(see 1 ). You Press
1
1
Now set the ventilation mode for period 1.
Perform the following actions for this:
Select 'Ventilatiestand' by turning
1
Press
Set the ventilation mode for period 1 by turning
1
Press
You have set the ventilation mode for period 1 You can set
period 2 through 6 in the same manner. A period ends when a
new one starts.
4.3.3 Creating a P2 program (see
Press return
main screen
Press
3
Select 'P2: week/weekend' by turning
Press
1
10
1
)
as many times as necessary to get to the
2
.'Setting & activating timer programme' opens
1
, 'P1: week' opens
1
, 'Period 1' opens
1
, 'Start time' opens
1
1
, 'Ventilatiestand' opens
1
)
as many times as necessary to get to the
2
.'Setting & activating timer programme' opens
, 'P2: week/weekend' opens
1
1