Safety Instructions - i-tec Thunderbolt 3 Gebrauchsanweisung

Quick Start
ADAPTER DESCRIPTION
1. 2x Display Port – for connecting monitors
2. Connecting cable with Thunderbolt 3 connector – for connecting adapter to a
notebook, a tablet, a PC or a smartphone with Thunderbolt 3 port
Once connected, the drivers will be installed automatically from the system.
NOTICE!
Before installing, make sure that the latest drivers and updated BIOS are installed on
your system.
CONNECTING A DISPLAY PORT MONITOR
The adapter is equipped with 2x 4K@60Hz Display Port for connecting one or two
external monitors or a projector with Display Port interface. Advanced plasma and
LCD monitors and TVs can be used as an imaging equipment. Graphics chip that is „
the heart" of the adapter supports up to 5K (Ultra HD) resolution
5120x2880@60Hz when using only one monitor (connected with two DP cables).
Use only high quality Display Port cables for connecting the monitor to the adapter.
During the additional monitor installation, the screen of the laptop Mac, tablet or
PC can flicker, but this is normal.
Most problems with the adapter and connected devices can be solved by
disconnecting the adapter's Thunderbolt 3 cable from the Thunderbolt 3 port on
PC, Mac, smartphone or tablet and reconnecting it after approximately 10 s.

SAFETY INSTRUCTIONS

Do not expose to extreme temperatures and air humidity.
ź
EN
04
Downloaded from www.Manualslib.com manuals search engine