Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Declaration of Conformity
The
manufacturer:
Declares that the design and construction of the machine designated below complies with the relevant basic safety and
health requirements of the EC Machinery Directive 2006/42/EC.
Designation:
The following standards were applied to implement the safety and health requirements specified in the EC Directives:
1. EN ISO 12100 Safety of machinery - General principles for design, Risk assessment and risk reduction
2. Centrifugal testing according to DIN EN 847-1, Tools for woodworking - Safety requirements - Part 1: Milling tools,
circular saw blades
Internal measures were taken to ensure that the series devices always comply with the requirements of the current EC
directives and the applied standards.
Caution: The attachments to which this Declaration of Conformity refer may only be used with the supplied
motor.
Only original Eder attachments may be used on the supplied motor.
Wolfenbüttel, Germany 15/07/2016
Downloaded from
www.Manualslib.com
Eder Maschinenbau GmbH
Schweigerstraße 6
38302 Wolfenbüttel
Germany
EDER Wire Brush set ERB-A56
Serial no.: SN XX XX XX and the subsequent numbers
Ulrich Schrader, Managing Director
manuals search engine
61
Werbung
Kapitel
Inhaltsverzeichnis
