eder ESG-A56 Gebrauchsanweisung Seite 38

EN
The EDER Trough Cutter ETH-A56 is designed for cutting out cavities in wood surfaces. It
can be used for making troughs and sculptures, for surgical measures on trees and for
removing trunk pieces. The circular knives are arranged so that it can used for performing
work lengthwise as well as diagonally. Two knives are fitted on the milling head, which
creates a smooth surface without any vibrations. The minimum blade projection setting
effectively prevents the log from splitting. The milling head design achieves high cutting
performance with minimum effort.
(P.29)
The EDER Carving Cutter ESF-A56 is designed for milling channels and grooves in wood
surfaces. It can be used when building log houses, children's playgrounds, carving
sculptures and similar projects. Two circular knives are fitted on the milling head. Their
adjustable minimum blade projection setting effectively prevents the log from splitting. The
arrangement of the circular knives creates a channel when milling, which creates a smooth
surface without any vibrations. The design of the milling head achieves high cutting
performance with minimum effort.
(P.32)
37
Downloaded from www.Manualslib.com manuals search engine