Inateck BCST-70 Handbuch Seite 12

Inventory Mode
Users may use inventory mode to keep scanned barcodes in the buffer of Inateck
BCST-70, and upload them to computer in batches. Under inventory mode users are
not restricted to the time and location when upload data. Of course, history data can
be cleared in buffer. More details about inventory mode are as below.
1. Scan the barcode to enter Inventory Mode
2. Scan the barcode to return to Common Mode
3. Scan the barcode to clear data in buffer (for Inventory Mode only).
4. Scan the barcode to upload data from buffer (for Inventory Mode only)
5. Scan the barcode to upload the number of scanned barcodes (for Inventory Mode
only)
Note:
1) To use inventory mode, users just need scan "Enter Inventory Mode" barcode; and
do not have to scan "Enter Setup" barcode before that.
2) To end inventory mode, users just need scan "Return to Common Mode" barcode.
10
Downloaded from www.Manualslib.com
Enter Inventory Mode
（*）Return to Common Mode
Clear Data in Buffer(for Inventory Mode only)
Data Upload (for Inventory Mode only)
Upload the Number of scanned barcodes
(for Inventory Mode only)
manuals search engine