iStorage diskashur PRO2 Schnellstartanleitung Seite 6

Adding a New User PIN in addition to the Admin PIN
In addition to the Admin PIN, the diskAshur PRO
To create a new User PIN follow the steps below.
1. In Standby State (solid RED
press and hold down both the 'UNLOCK
and number '1' buttons.
2. Enter your Admin PIN (default
'11223344') and press the
'UNLOCK' button.
3. In Admin mode (solid BLUE
and hold down 'UNLOCK + 3' buttons.
4. Enter your NEW User PIN and press
'UNLOCK' button.
5. Re-enter your NEW User PIN and press
'UNLOCK' button.
6. To exit Admin Mode press the 'LOCK'
button.
Unlocking with either the Admin or User PIN
Unlock with Admin PIN [ (UNLOCK + 1)
1. To unlock as the Administrator, in Standby state
(GREEN and BLUE LEDs will blink together), next, enter the Admin PIN and press the "UNLOCK" button, LED will
change to a solid BLUE and finally press the 'UNLOCK' button again - LED changes to
is unlocked.
Unlock with User PIN (
2. To unlock the diskAshur PRO
off, then enter your User PIN and press the 'UNLOCK' button again.
ternately blink several times and finally changing to a solid
and ready to use as the User.
For more features and detailed instructions please refer to the user manual pre-loaded on your new diskAshur PRO
and also available on our website.
iStorage Limited, iStorage House, 13 Alperton Lane, Perivale, Middlesex, UB6 8DH, England
Telephone: +44 (0) 20 8991 6260 - Website: www.istorage-uk.com - Email: info@istorage-uk.com
6
can be configured with an independent User PIN.
2
LED),
Solid
BLUE
GREEN
a few seconds then to a solid
solid
'Admin Mode'.
LED), press Solid
solid
Blinking
a single
GREEN
GREEN
changes to a solid
has been successfully created.
Solid
the standby state.
+ (Admin PIN)
(RED LED) press and hold down both 'UNLOCK + 1' buttons
+ User PIN + )
as the User, press the 'UNLOCK' button, all LEDs will blink on and
2
RED LED will change to blinking
LEDs.
and BLUE LEDs blink rapidly together for
GREEN
BLUE LED indicating the diskAshur PRO
BLUE LED will change to blinking
BLUE LEDs.
GREEN and solid BLUE LEDs will switch to
GREEN LED blink and then back to blinking
and solid BLUE LEDs.
LED rapidly blinks for a few seconds then
BLUE LED indicating the User PIN
RED LED indicates the drive is locked and in
+ ( ) + ( ) ]
GREEN indicating the drive
GREEN and BLUE
GREEN LED indicating the drive is unlocked
GREEN and
and finally a
is in
2
GREEN and
LEDs will al-
2
6