Hints And Tips; Care And Cleaning; General Information; Troubleshooting - Leonard LEM6000E Benutzerinformation

Using the rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up
faster than usual plates. The red dots are

HINTS AND TIPS

WARNING! Refer to Safety
chapters.
Cookware
The bottom of the cookware
must be as thick and flat as
possible.

CARE AND CLEANING

WARNING! Refer to Safety
chapters.

General information

• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface
have no effect on how the hob operates.
Stainless steel
• For stainless steel edges of the hob use
a special cleaner applicable for the
stainless steel.
• The stainless steel edge of the plate can
change the colour as a result of high
temperature.

TROUBLESHOOTING

WARNING! Refer to Safety
chapters.
What to do if...
Problem
You cannot activate or oper-
ate the hob.
painted on the plates. They can deteriorate
during use and even disappear completely
after a period of time. It does not have an
effect on the performance of the hob.
• Wash stainless steel parts with water,
and then dry them with a soft cloth.
Cleaning the electric hotplate
1. Use the cleaning powder or the
cleaning pad.
2. Clean the hob with a moist cloth and
some detergent.
3. Heat the hotplate to a low temperature
and let it dry.
4. To keep the hotplates in good shape,
rub in a sewing machine oil regularly.
Polish off the oil with absorbent paper.
Possible cause
The fuse is released.
CAUTION! Do not use cast iron
pans, potstones, earthenware,
grill or toaster plates. The
stainless steel can become
tarnished if it is too much
heated.
Remedy
Make sure that the fuse is the
cause of the malfunction. If
the fuse releases again and
again, contact a qualified
electrician.
Leonard 15