Mesh Face Shield User Manual - LAHTI PRO L1520700 Bedienungsanleitung

To ensure safe use, read the product user's
manual in detail.
Keep these instructions for future reference.
1. DESIGNATION :
The L1520700 face shield (model D1012), hereinafter referred to as
the shield, makes up a single product with the mounting frame,
hereinafter, the headgear. The shield should be assembled as shown
in the figure on page 2. The headgear should be used with the
protective mesh shield only. Shields other than the genuine shield
must not be used.
This is personal protection equipment and has CE mark. It meets
the requirements of EN 1731 and directive 89/686/EEC, confirmed
by the EC-Type examination certificate, issued by Notified Body ECS
European Certification Service GmbH, Hüttfeldstraße 50,
73430 Aalen, Germany. Notified body no.: 1883 .
The shield is designed for protecting eyes and face from solid splinters
with low impact energy (corresponding to the hit with a ball 0,86g
with the speed of 45m/s), created while working (e.g. during manual
and machine-based processing of metals, wood, plastic, stone and
aggregate).
The shield should be worn at all times at work where there is a risk of
face damage by the above-listed external factors.
WARNING! The mesh face shield does not provide
protection against liquid splashes (including
molten metals), hot solids, electric current and
UV and IR radiation.
It is prohibited to use the mesh face shield while welding.
Mesh face shield can be used together with prescription glasses.
WARNING: The eye protection protecting against
the impact of fast-moving particles worn with
standard corrective eyeglasses can transfer the
impact energy, causing a risk to the user.
2. MARKING:
manufacturer's symbol
YJP– ;
D1012 – model;
EN 1731 – number of standard used to assess the conformity
F – resistance to hitting with particles with low impact energy;
– CE Mark;
– Year of manufacture is
indicated by the arrow
USER MANUAL
MESH FACE SHIELD L1520700
( Original text translation
;
– Month of manufacture is
indicated by the arrow
3
)
3. ASSEMBLY:
See figures on page 2.
I. Join elements A (adjustment straps) and B (mounting frame), and
secure retaining nuts 1.
Adjust the straps (A) to the head size with adjustments 2 and 3.
II. Attach the mesh shield C to the mounting frame B while aligning
openings in the shield with locking clips 4.
III. Rotate the locking clips 4 90 degrees to secure the mesh shield C in
the mounting frame B.
4. WARNINGS:
The materials used for producing the shield should not cause any skin
irritation or allergic response. Occasional individual reactions can,
however, occur in people particularly allergic to plastic. In such a case
stop using the shield and seek medical advice.
If the protection from high-speed impact is required in extreme
temperatures, the selected eye protection measure should be
marked with T directly after the letter being the impact symbol, i.e.
FT, BT, AT. If the letter symbolising impact is not directly before T, the
eye protection measure can be used solely to protect from high-
speed particles in room temperature. WARNING: If the shield is
damaged, stop working immediately and replace the product with a
new, defect-free one.
5. CLEANING :
The shield should be regularly cleaned from dust and other
pollutants deposited during its use. Do not clean the shield with any
abrasive, scratching or caustic agents. Clean the shield with a moist
cotton cloth. Wipe dry after cleaning.
6. PACKING AND STORAGE :
Individual ace shields are packed in sealed plastic bags. f
they are packed in collective boxes which is appropriate for their
proper storage and transport.
The shield should be stored in room temperature, far from chemicals,
abrasives and sources of heat.
7. EXPIRY OF THE BEST BEFORE DATE
The best before date is unlimited. The shield loses its protective
properties and should be replaced if the protective mesh is distorted,
cracked and deformed, or the frame is damaged.
8. PROTECTION OF THE ENVIRONMENT:
The materials used for producing this product are recyclable. The
product should be disposed in accordance with the environment
protection requirements and waste disposal regulations, as well as
with the requirements of local authorities.
Additionally,
: