Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12. Reestablish a lost connection between Transmitter and
Receiver
The connection between transmitter(s) and receiver is established
ex works.
If the connection needs to be newly established, please follow these
steps:
1. Turn on the receiver and the transmitters.
2. On the receiver, press the buttons "+" and "-" for 3 seconds, and
on one transmitter, press „Pair" for 3 seconds simultaneously.
3. When transmitter and receiver connect successfully, the light on
the receiver will stay blue, and the light on the transmitter will
flash every 2.5 seconds.
4. Repeat step 2 for the other transmitter.
If the connection cannot be established, the receiver and transmitter
lights will flash every second. In that case, try steps 1-4 again.
Tips and notes:
• Please follow all the safety instructions.
• Please keep the microphone away from dust and water.
• Please keep the manual in a safe place if you want to pass the
microphone on to other users.
• Please do not replace any components inside the microphone
on your own.
• Please keep the microphone away from children and pets.
35
13. Specifications
RF Modulation
Frequency band:
Frequency response:
Signal/Noise:
Distortion:
RF output level:
Earphone output level:
Reception sensitivity:
Audio connector:
Operation range:
Power requirements:
Consumption power:
Dimensions:
Weight:
GFSK
(Gauss frequency Shift Keying)
2.4GHz (2405-2478MHz)
35Hz-14KHz±3dB
84dB or more
0.05% or less
(32Ω, 1 KHz, 65mW output)
3mW
32Ω, 65mW
-90dB +/- 3dB / 0dB=1V/Pa, 1kHz
3.5mm mini jack
60m (197ft) (without obstacle)
3V DC (Two AAA size batteries
per device)
Transmitter: 3V/70mA
Receiver: 3V/70mA
Receiver: 45x70x35mm
(1.8 x 2.8 x 1.4 inches)
Transmitter: 45x70x35mm
(1.8 x 2.8 x 1.4 inches)
Receiver: 47g (1.7 oz)
Transmitter: 47g (1.7 oz)
36
Werbung
