Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10. Using the microphone with cameras, camcorders, audio recor-
ders and other audio/video recording devices.
Receiver
• Mount the receiver to your camera, camcorder, audio recorder
and other audio/video recording device via the hot shoe adapter,
if possible.
• Use the TRS cable. Plug the 3.5 mm connector into the audio
socket of your camera / recording device.
• Insert the cable's other plug into the receiver's "LINE OUT"
socket.
• Insert your earphone plug into the receiver's "
monitoring sound if needed.
• Slide the ON/OFF switch to ON position. The LED indicator will
light up blue.
• Caution: Please do not mix up the plugs.
NOTE
• Mind not to switch the plugs
11. Installing the System
• The transmitter and receiver come with clips already mounted.
• Both transmitter and receiver include a clip. This means you can
attach them to belts or pockets or other pieces of garment.
• Rotate the unit freely as desired or as applicable.
33
• To mount the receiver onto a hot or cold shoe, please follow these
• Detach the clip by pushing it out of its holder as shown in the
" socket for
• Push the cold shoe mount into the bracket on the device.
• Mount the receiver onto the desired hot/cold shoe.
steps:
graphics.
34
Werbung
