Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Transmitter (TX4 Pro)
8
4
5
6
1. Microphone input
• Connect the supplied lavalier microphone here.
• Fully insert the microphone's 3.5mm plug and make sure it clicks
into place.
2. Line In
3. Power-LED
• The power LED flashes blue when the unit is on.
• The power LED glows red when the power is low.
Status
The transmitter and the
receiver connects.
The transmitter and the
Flashes continually
receiver disconnects.
Receiver unit is turned
Off (Transmitter is still
On)
27
1
2
3
7
Receiver
Transmitter
Flashes continually
Stays blue
every 2.5 seconds.
Flashes continually
every 1 second.
every 1 second.
Off
Flashes in blue
Status
Transmitter unit is
turned OFF (Receiver is
still ON)
Low power
4. Power OFF/ON
5. Pair
This button triggers the connection signal if the connection has been
lost. See Page 32.
6. Antenna
NOTE
Please don't touch here during use, otherwise the signal will be
affected.
7. Battery compartment
Accommodates 2 AAA batteries.
8. Clip
Receiver
Transmitter
Flashes in blue
Off
Flashes in red
28
Werbung
