Quick Installation - Cudy LT500 Schnellinstallationsanleitung

Quick Installation

1. Insert the Micro SIM card into the slot until you hear a click.
LAN1 LAN2 LAN3
SIM card requirement
Nano sim card
2. Connect power adapter and turn on the router. Waiting for 2 minutes
for it to start.
3. Check the status of the system LED.
If the system LED turn to solid blue, means connect to 4G network successfully.
If the system LED turn to solid purple, means connect to 2/3G network.
If the system LED turn to solid red, please follow the instructions of
the 4G Router.
LAN4/WAN Micro SIM WPS RESET POWER
1 2
Micro SIM
Micro sim adapter Micro sim card
— 1 —
Customize The 4G Router
1. Connect the router via ethernet cable or Wi-Fi. Network name and
password is printed on the bottom of the router.
2. Launch a web browser and enter
in the address bar, use admin as password to login.
3. Below page would pop up if your SIM card needs PIN to unlock. Please
enter your PIN and click Save & Apply, then wait 15 seconds to connect
to the Internet.
Customize
4G LTE AC1200 Dual Band Wi-Fi Router
5GHz Wi-Fi: Cudy-XXXX-5G
2.4GHz Wi-Fi: Cudy-XXXX
Password: XXXXXXXX
http://cudy.net/ (or http://192.168.10.1/)
http://cudy.net/
Auto
admin
Password
Log In
4G Settings
The SIM is locked, please enter the PIN code. You have
3 attempts at most for entering the PIN code.
PIN
Save & Apply
— 2 —
EN