Chapter 2 Installation - ASROCK Z370 Killer SLI/ac Bedienungsanleitung

Chapter 2 Installation

This is an ATX form factor motherboard. Before you install the motherboard, study
the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
• In order to avoid damage from static electricity to the motherboard's components,
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
• When placing screws to secure the motherboard to the chassis, please do not over-
Downloaded from www.Manualslib.com
components. Failure to do so may cause physical injuries and damages to motherboard
components.
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
in the bag that comes with the components.
tighten the screws! Doing so may damage the motherboard.
manuals search engine
Z370 Killer SLI/ac / Z370 Killer SLI
15