Herunterladen Inhalt Inhalt Diese Seite drucken

glass 1989 STEAM Bedienungs- & Wartungsanleitung Seite 17

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
Warning: risk of burns!
The steam diffuser becomes very hot
during the steam function!
Some water may leak out from the diffuser
during the steam cycle.
Do not touch the steam diffuser while in
operation and right after turning it off.
LIGHT / CHROMOTHERAPY (LED)
P1 P2
1
2
3
To start the function, simply touch the
"LIGHT" icon.
NOTE: The light has a pre-set duration
of 60 minutes, after which is switches off
automatically.
HOME SCREEN:
The DISPLAY features the logo and the
light symbol with a "line" underneath (no.
3).
T h e C H R O M O T H E R A P Y f u n c t i o n
features 2 automatic programs (duration
approximately 1h) or a sequence of fixed
colours with manual activation (RED -
ORANGE - GREEN - BLUE - YELLOW
- WHITE)
To choose a "program" select the "Play/
Pause" icon. The first time the key
is pressed the line under the symbol
switches off and a flashing line appears
under the logo (no. 1); press the key again
to go to the next flashing line (no. 2).
Select the desired program, confirm
by pressing the "STOP" icon within 5
seconds; the flashing line becomes
fixed and the selected colour program is
activated.
In the manual program (no. 3), you can
switch from one colour to another using
the "+" and "-" icons.
To switch the light off simply select the
"LIGHT" icon until it has switched off or
press the "ON/OFF" icon.
MUSIC VIA BLUETOOTH
Before using this function, the transmitter
(MP3 player, mobile phones, PCs and
other music players with Bluetooth
must be connected to the Bluetooth
receiver featured in the product.
ASSOCIATING THE DEVICES
To find other devices, perform a scan
using the transmitter (see transmitter
manual). The presence of the Bluetooth
receiver will be displayed with the name
"GLASS". Select the "GLASS" device and
associate the devices by entering the PIN
code '0000' (the protection code will only
be used the first time the devices are
associated).
After the devices have been associated,
the "GLASS" device will be saved in the
"associated devices".
5
EN
®
2.1)
®
®

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis