Installation; Reversing The Door - Polar CS586 Bedienungsanleitung

UK

Installation

Note: If the unit has not been stored or moved in an upright position, let it stand
upright for approximately 12 hours before operation. If in doubt allow to stand.
1. Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are
thoroughly removed from all surfaces.
2. Maintain a distance of 20cm (7 inches) between the unit and walls or other objects for ventilation.
NEVER LOCATE NEXT TO OR NEAR A HEAT SOURCE.
Note: Before using the appliance for the first time, clean the shelves and interior
with soapy water.
3. If necessary, adjust the screw feet of the appliance to make it level.

Reversing the door

Depending on the location of the appliance, it may be necessary to change the direction the door opens
by changing the side of the door handle.
To reverse the door handle:
1. The door handle is on the left side. Disassemble the right upper hinge and the hinge cover.
4
CS586_ML_A5_v2_20200402.indb 4 2020/4/2 09:59