Urban Arrow Cargo Gebrauchsanweisung Seite 23

2
The bolt should be tightened to the correct torque.
Overtightening could lead to the bolt breaking, not tightening
the bolt enough could lead to slippage of stem and bars
(they could move when you ride over a bump for instance). A
confi dent home mechanic should be able to judge the correct
torque by hand. Check appendix A for the correct torque
values.
4. Sit on the saddle and face forward. Rotate the grips 108 to
optimise the angle of the brake levers 81 and 85 .
The angle of the brake levers is set correctly when the brake
levers visually disappear behind the grips. (see image 12).
6
Always check the angle of the brake lever after you change
the stem angle. Change the angle of the grips if necessary.
When the brake levers have an incorrect position it is more
diffi cult to exert force, which may lead to reduced break
performance.
If you feel you cannot achieve a good bike fi t by changing the
Tip
angle of the stem you might need a different stem and/or handlebar
fi tted. Please contact your Urban Arrow dealer for advice.
If you are unsure how to adjust the stem or need bike fi tting
Tip
advice, please contact to your Urban Arrow dealer.
User manual
Image 9: Loosening the bolt on the stem
Image 10: Adjusting the stem and handlebar angle
Image 11: Stay within the range indicated on the side of the stem
EN
21