DigiSender XD-2KM Bedienungsanleitung Seite 6

(EN) ENGLISH
DGXDSDV111SMA-2KM/DGXDSDV112SMA-2KM - 2000m Digital AV Sender System
continued...
5.
Connect the IR Emitter to the socket labelled 'IR' on
the back of the DigiSender® Transmitter. See Page
07 for more information on installing the IR Systeme
Technik™ Remote Relay Kit.
Page 06
Downloaded from www.Manualslib.com manuals search engine
6.
Connect the Power Supply Unit (PSU) to the socket
labelled '5V ~1.0A' on the rear of the Transmitter
and plug it into an available mains socket. The Pow-
er LED will light up Red to indicate that the unit is
in Standby Mode.
Please read the instructions carefully prior to installation