Control Functions; Led Indicators; Bluetooth Pairing - TaoTronics Hello Bedienungsanleitung

Control Functions

Function TX Mode
Press and hold for 4
seconds to turn the
Power ON/OFF
adapter On/Off
Volume +/-
N/A
Previous/Next Track
N/A
Switch between
transmitter and
Use TX/RX switch
receiver Mode
Play/Pause
N/A
Press the power
Mute
button once

LED Indicators

LED Indicator
Red LED indicator ashes 3 times
Red LED indicator ashes 2 times
LED indicator in red
LED indicator turns off
LED indicator ashes in red and
blue alternately
Red LED indicator ashes every 3 seconds
Blue LED indicator ashes every 10 seconds
Downloaded from www.Manualslib.com
RX Mode
Press and hold for 4
seconds to turn the
adapter On/Off
Press and hold the
volume +/- button
Short press the volume +/-
button
Use TX/RX switch
Press the power button once
N/A
Status
Power On
Power Off
Charging
Fully charged
In pairing mode
Paired in TX mode
Paired in RX mode
manuals search engine
Charging
To charge the receiver:
Insert the micro-USB end of the charging cable into the
•
charging port of the adapter.
Plug the USB end of the charging cable to an USB charging port
•
or any active USB port.
The LED indicator will turn red when charging. It will
•
automatically turn OFF when the adapter is fully charged.
Note: You can use the adapter while it is charging. The internal
circuit is designed to protect it from over-charging.

Bluetooth Pairing

To pair the adapter with other Bluetooth devices, you must bring
the adapter into pairing mode. This is indicated by the LED
indicator ashing red and blue alternately.
RX Mode:
1) Slide TX/RX switch to RX position.
2) Press and hold the power button for 4 seconds until the LED
ashes red and blue alternately.
3) Activate Bluetooth on your phone and set it to search
for new devices.
4) Select "TaoTronics TT-BA05" on your phone.
TX mode
1) Slide TX/RX switch to TX position.
2) Power on the adapter to enter pairing mode.
3) Turn on the Bluetooth on your device for the pairing.
4) After successfully paired, the red LED indicator
will ash every 3 seconds.
Note:
• The adapter can remember the last successfully paired device.
To reconnect to the last paired device, simply turn on your
device and the adapter. The Bluetooth connection will
automatically re-establish.
05/06