Installation; Operation - FALMEC Bellaria Gebrauchsanweisung

Operating
EN
and maintenance instructions

INSTALLATION

Before installing the device, read the "Safety instruc-
tions and warnings" chapter carefully.
TECHNICAL FEATURES
The technical specifications are shown on a label mounted on
the device: 24Vdc 0,6A.
POSITIONING
The device is free-standing and can be placed anywhere with-
in the home, in typical household temperature and humidity
conditions.
T= 10÷35°C
H= 40÷80%
Avoid sources of heat and high humidity environments.
ELECTRICAL CONNECTION
The product should be used only with a power supply.
Before connecting the equipment to the electrical mains power
supply, check that:
the mains voltage corresponds to that specified on the label on
the power supply: 100÷230V 50/60Hz 30W SELV.
To avoid overloading, do not share the same power outlet with
too many appliances.
once connected, the plug and cable do not come into contact
with hot parts having temperatures that exceed 70°C;
Do not place any connecting cable where it can be stepped on
or disconnected.
Do not place heavy objects on it, to prevent its ends from being
damaged.
The socket used for connection is within reach with the device
installed.
Grasp the plug and not the cables for disconnection from the
socket.
The Manufacturer declines all responsibility for failure to comply
with the safety regulations.
In the BELLARIA, the air passes through the dust filter and ac-
tivated carbon filter and then through the ioniser which acts
against the pollutants present in the home, ionising and puri-
fying the air that is fed back into the environment.

OPERATION

Key Description
Switches off and
reduces speed
Switching on and
increases
speed from 1 to 3
If pressed for 4 seconds, it acti-
vates the automatic cycle:
BELLARIA will be activated only
in the presence of pollutants.
The function is disabled if:
• there are no pollutants detected
for 3 hours.
• Keys and
Light ON/OFF
When the light is ON, press the button to
reduce the light intensity.
AIR QUALITY
The air quality is displayed by the colour of the 3 leaves.
Green = optimum quality.
Yellow = presence of pollutants.
The more pollutants present, the more intense the colour yellow.
WHICH SPEED IS TO BE SELECTED?
- 1st speed: keeps the air clean with low noise
(green leaves).
- 2nd speed: normal conditions of use.
(moderately yellow leaves).
- 3rd speed: high presence of pollutants
(yellow leaves).
LIGHTING
BELLARIA is equipped with high-efficiency, low-consumption LEDs, very
long life and "dimmer" function.
(see OPERATION)
12
Bellaria
Speed 1
Speed 2
Speed 3
("+" LED flashing)
and
are pressed. flashing