GLOBBER 550-120 Benutzerhandbuch Seite 5

Elbow guards XXS
21.5 - 25 cm
XXS
Knee guards
28 - 32 cm
XXS
Wrist guards
17.5 - 19 cm
MATERIAL:
The guards are made of PP plastic, polyester and foam nylon.
CLEANING
1. Clean your guards with a brush.
2. In case of difficult stains, soak them in soapy luke-warm water
and rinse with water.
3. Do not dry clean or clean with an aggressive detergent (for
example: bleach, petrol, lye, ammonia).
MAINTENANCE
1. After each use and each fall, check the state of your guards.
2. Inspect regularly. If the plastic shells are cracked, if the
adjustment strips have lost their elasticity, if the self-adhesive
strips lose their adhesive quality or if part of the material is torn,
the protection gear is then likely to no longer properly serve
their purpose.They should no longer be used and should be
disposed of.
3. This gear is not designed to be used in extreme temperatures:
- Below zero, the plastic shells will lose a bit of their flexibility
but this will not affect their performance. We recommend that
you do not use skates or a skateboard in temperatures below
-10°C, because the shells will become less resistant.- Do not
expose guards to high temperatures (for example: leaving them
in the sun in a car). This may cause the shells to crack.
4. If well maintained your guards may last more than 2 years.
JUNIOR
XS
24 - 28 cm 23 - 28 cm
XS
33 - 36 cm 33 - 36 cm
XS
19 - 21 cm 19 - 21 cm
ADULT
S M
27 - 30.5 cm
S M
36 - 39 cm
S M
21 - 23 cm
5. In the interest of efficiency, we recommend that you do not
repair the guards, it is best to change equipment.
Do not alter the gear (build, colour, etc.). Any contamination,
alteration or misuse of the protective gear may dangerously affect
their performance.
The lifespan of the protective pads is 4 years from date of
manufacture. After 2 years of usage of an average wearing time
of 180 days of use per year, the protective pads has also to be
exchanged.
Made in China
L XL
29.5 - 33 cm 31 - 35 cm
L XL
40 - 43 cm 41 - 45 cm
L XL
23 - 25 cm 25 - 27 cm
5