Turning The Printer On - Tally Genicom 9045N Kurzanleitung

Chapter 2 Setting Up Your Printer
Turning the
Printer On
18
The printer motors run for 2 or 3 minutes when you first turn the power on.
The top line of the LCD display reads:
Followed by asterisks progressing across the
bottom line:
Following an LED self test, asterisks progress
across both lines of the display, the beeper
sounds ...
... and the Power On Self Test ends with the
top line of the display reading:
While turned on, the printer will go into the standby state if it remains idle for a period of time.
When you have finished using the printer for the day or you do not intend to use
it for a long period of time, switch off the power.
Quick Start Guide
1 Press the power switch to the
<I> position to turn the power
on.
Loading
Loading
**************
**************
**************
Initializing
Ready