Beurer ME 90 Gebrauchsanweisung Seite 35

Measurement
method C
Press the lower electrode until you hear or feel a click.
Important: Do not press the device too firmly against your skin.
Note: Please note that there must be no skin contact between your right and left hand
(measurement method C) or hand and chest (measurement methods A/B). Otherwise, the
measurement cannot be taken correctly.
Do not move during the measurement, do not speak and hold the device still. Movements
of any kind will falsify the measurements.
3. The device will start beeping (if the beep is enabled) and the number
indicator will flash for a few seconds. This indicates that the measurement
is about to begin.
4. The measurement is completed, and the results are displayed at the end of
the 30-second countdown.
Note: If the bottom electrode is removed within the space of three seconds after the
measurement starts, the measurement will be displayed as EE .
"left hand–right hand"
(approximately corresponds to "lead 1")
Place your right index finger on the two upper electrodes on the
device.
Place a finger of your left hand on the lower electrode.
35