14
Please note that this process is not reversible.
1
2
3
4
Note: This step requires a good amount of physical force. The top and bottom
half of the handle should be separated once you snap the handle.
5
6
7
8
support
The terms of the international guarantee do not cover the following:
-
-
-
35_020_9638_1_DFU-Booklet_Simple_A6_v2.indd 14
Downloaded from
www.Manualslib.com
ENGLISH
Removing the rechargeable battery
To deplete the battery, repeatedly press the activation button until
the AirFloss Ultra no longer produces any bursts of air (Fig. 22).
Remove the nozzle from the handle. (Fig. 23)
Firmly grab the handle with one hand at the top and one hand on
the bottom (Fig. 24).
Snap the handle into two parts. (Fig. 25)
Remove the bottom half of the handle (Fig. 26).
Cut all 6 wires on the internal component with scissors (Fig. 27).
Completely pull apart the internal component from the top part of
the handle (Fig. 28).
The battery is located inside the top half of the handle. Remove the
battery and dispose of it properly (not in household waste) (Fig. 29).
Guarantee and support
Guarantee restrictions
AirFloss Ultra nozzle.
repair.
discolouration or fading.
manuals search engine
www.philips.com/
12/12/14 11:47 AM