Basic Operation - ViewSonic SD-A225 Kurzanleitung

F. Start-up and initial setting
Turn on the Power
1) Make sure the power cable and AC adapter are connected.
2) Press the power button until you see the power LED lighting green.
Shut Down
If the power button is pressed shortly, the screen shuts off and goes into power saving mode.
When the power button is pressed for about 8 seconds, the product is forced to shut down.
G. Power saving mode and Returning to operation
Entering Power Saving Mode
While product is in operation, briefly press of the power button puts the unit into power saving mode.
Returning from Power Saving Mode
While the power LED lights orange, briefly press the power button to return from power saving mode
H. Basic Operation
Lock Screen
1) Press and hold the power button until you see "Power off"
appears on the screen.
2) When the screen appears as shown on the left, tap "OK" to
shut down the power.
1) Touch the .
2) Drag to .
3) Home screen is shown.
5
is shown besides the .