Technical Specifications; System Requirements - Fritz! WLAN Repeater 310 Installation Und Bedienung

In the Home Network of a Wireless Router from Another Manufacturer
z For registration with a wireless router via WPS, the FRITZ!WLAN Repeater 310 adopts the
radio network name (SSID) and the password of the wireless router.
z Updates for the FRITZ!WLAN Repeater 310 can be performed in the FRITZ!WLAN
Repeater 310 user interface under "System / Update".
z The user interface of the FRITZ!WLAN Repeater 310 can be opened on all connected
devices using the IP address the repeater was assigned by your wireless router.
z First check the user interface of your wireless router to find out what IP address the
FRITZ!WLAN Repeater 310 was assigned, and then enter this IP address in the address
line of a web browser.
z See the documentation for your wireless router.
8

Technical Specifications

z IEEE 802.11n, compatible with
IEEE 802.11b/g (Wi-Fi 4)
z Up to 300 Mbit/s (gross); the user data
rate that can actually be achieved is
somewhat below the specified values.
WPA2 (802.11i), WPA/WPA2 mixed mode
z
z Total active power: approx. 3 W
z Wi-Fi 2.4-GHz range
2.4 GHz – 2.483 GHz, maximum 100 mW
z 230 V, 50 Hz A/C
0 °C to +40 °C
z
Measures: 81 x 51.5 x 66.5 mm
z
Weight: approx. 63 g
z
Two integrated antennas
z

System Requirements

z 2.4-GHz wireless router compliant with
IEEE 802.11b/g/n, automatic IP address
assignment (DHCP)
z The wireless router must support the
encryption standard WPA or WPA2
For expanded Mesh Wi-Fi functions:
z
FRITZ!Box with FRITZ!OS version 6.90
or higher
z Automatic IP address assignment
(DHCP)
z For first configuration with WPS:
Wireless router that supports WPS
z For initial configuration without WPS:
Computer with Wi-Fi that supports the
WPA Wi-Fi encryption standard
z For the first configuration of Wi-Fi: If
the MAC address filter is active in the
wireless router, the MAC address of the
FRITZ!Repeater must be entered as an
exception in the MAC address filter
9