Firmware Upgrade - RAVPower RP-WD009 Handbuch

Chapter 5
Note:
Resetting the FileHub means to recover it to
the factory settings, all data configured
previously will be reset, including the name
set for the FileHub and its connection with
your mobile.
EN/31
Settings Chapter 5

5.2 Firmware Upgrade

You may choose to upgrade the firmware when there is
any update available.
1. Download the latest software and firmware from
RAVPower Website: www.ravpower.com, and
place the firmware file in your mobile device or laptop.
2. Insert a USB thumb drive or SD card on FileHub
(Follow 2.2 on Page 12).
3. Power on the FileHub (Follow 2.1.2 on Page 11).
4. When the FileHub is on, connect your phone to
RP-WD009 WiFi (Follow 2.3 on Page 13).
5. Access the FileHub via RAV FileHub App or Webpage
(Follow 2.4 on Page15).
6. Go to Settings > System > Firmware Upgrade >
Select firmware from your mobile device or laptop >
Save > Wait to finish and reboot.
Settings
EN/32