Reset Settings - RAVPower RP-WD009 Handbuch

Chapter 4
4.2 Bridge Mode
4.2.4 FAQ
The setting applies to wireless networks that need a
username and password to connect or use a Terms
of Service agreement.
1. Get the username and password of the Wi-Fi
(if necessary).
2. Connect your phone to the FileHub wirelessly.
3. Open the browser and login 10.10.10.254.
4. Settings > Network Settings > Internet, choose
Wireless Access, click Scan to select the Wi-Fi,
then leave the password empty, click Save.
5. Open another page of the browser, the authorization
page will pop up, then login with the username &
password. The FileHub will now connect to the Internet.
Note: Please clear the browser cache if the
connection failed the first time and then
try again
EN/29
Use as a Travel Router Chapter 5

5.1 Reset Settings

(2 Ways)
Reset via Reset Pinhole:
1. Power on the FileHub (Follow 2.1.2 on Page 11).
2. Press and hold the Reset Pinhole for 10 seconds
with a pin or a toothpick.
3. Wait for the device to reboot.
Reset via Webpage:
1. Power on the FileHub (Follow 2.1.2 on Page 11).
2. Connect your devices to RP-WD009 WiFi
(Follow 2.3 on Page 13).
3. Find Restore to Factory Default Setting in the
router admin system (10.10.10.254) by Settings >
System > Reset Settings.
4. Tap the ON / OFF button to ON, and resetting
will start.
5. The WiFi indicator on the Filehub will flash blue
for a few seconds and stay solid on after the
device is rebooted.
Settings
EN/30