Bridge Mode - RAVPower RP-WD009 Handbuch

Chapter 4

4.2 Bridge Mode

4.2.1 Function Introduction
In Bridge mode, FileHub can create a secured WiFi
with a new SSID based on an existing wireless network.
The bridge mode is not supported for 5G WiFi network.
Internet
EN/27
Use as a Travel Router
Router
Chapter 4
4.2.2 How to Use
1. Power on the FileHub (Follow 2.1.2 on Page 11).
2. Connect your devices to RP-WD009 WiFi
(Follow 2.3 on Page 13).
3. Access the FileHub via RAV FileHub App or
Webpage (Follow 2.4 on Page15).
4. Go to Network Settings > Internet > Wireless
Access to create the connection between your
FileHub and your existing wireless network.
5. Wait until the Internet indicator
6. Check that your device is connected to RP-WD009
WiFi successfully.
4.2.3 FAQ
Q: The network speed decreases in the Bridge Mode.
A: In Bridge mode, the WiFi speed will be 50% of that
under the AP mode. Each packet must go over the
air twice-from the client to the filehub, then from
the filehub to the WiFi router. This is the industry
standard for almost all routers with bridge mode.
Use as a Travel Router
turns solid on.
EN/28