Chapter 4 Use As A Travel Router; Access Point (Ap) Mode - RAVPower RP-WD009 Handbuch

Chapter 4

4.1 Access Point (AP) Mode

4.1.1 Function Introduction
Connect a wired network to the router to change it to
wireless for multiple devices (especially for temporary
network use). The FileHub will automatically become
an access point when connecting to a well-set router
(like in a hotel).
Internet
Wired Network
EN/25
Use as a Travel Router Chapter 4
4.1.2 How to Use
1. Power on the FileHub (Follow 2.1.2 on Page 11).
2. Connect your devices to RP-WD009 WiFi (Follow
2.3 on Page 13).
3.Connect the FileHub to the router or the existing
wired network.
4. Now the FileHub is connected to a wired network,
the other device can connect to the FileHub (and
access the wired network) via the WiFi connection.
4.1.3 FAQ
Q: My mobile cannot connect to the FileHub after
changing the SSID password.
A: Go to Settings > WiFi on your mobile phone, tap
the connected WiFi and then Forget This Network,
and connect again. If it still doesn't work, reset the
FileHub to factory settings.
Use as a Travel Router
EN/26