Troubleshooting - Husqvarna BLi550X Bedienungsanweisung

To start the battery
• Push the power switch of the battery to ON. Refer to
Product overview on page 3 . Wait until the green
LED comes on.
Note: The battery stops automatically when the
battery is not used.
Battery LED indicator
The display shows the state of charge and if there are
problems with the battery.
LED indicator
All LED lights are on The battery is 80% - 100%
4 LED lights are on
3 LED lights are on
2 LED lights are on
1 LED light is on
To adjust the shoulder strap
1. Push the button (C) and turn the shoulder strap (A)
to release the shoulder strap. (Fig. 3)

Troubleshooting

Symptoms
The battery error LED flash-
es.
The battery error LED
comes on.
The battery does not start.
To replace the fuse
1. Examine the fuse. A blown fuse is identified by a
burned connector.
1433 - 001 - 12.05.2020
Battery status
charged.
The battery is 60% - 80%
charged.
The battery is 40% - 60%
charged.
The battery is 20% - 40%
charged.
The battery is 0% - 20% charg-
ed.
Troubleshooting
Cause
Temperature deviation, the battery is too
cold or too hot to use.
The battery is empty.
The battery cell difference is too much
(1V).
The battery fuse is blown.
2. Attach the shoulder strap in 1 of 3 positions (B).
3. Turn the shoulder strap to lock it.
To attach the battery to the harness
WARNING: Only use Husqvarna original
batteries.
1. Make sure that the battery is fully charged.
2. Pull out the lock handles. Refer to
on page 3 .
3. Attach the battery on the hooks of the harness.
4. Push the lock handles to lock the battery.
To connect the battery to the
Husqvarna handheld product
Note: If you use the accessory (A) for grass trimmers,
attach the accessory to the harness before you connect
the battery.(Fig. 4)
1. Connect the battery to the Husqvarna handheld
product. (Fig. 5)
2. Attach the cable to the harness.
To install the branch protection
The branch protection prevents accidents that can occur
if branches get caught in the handle of the battery.
• Put the branch protection (A) in the handle. (Fig. 6)
Solution
Let the battery cool down or move it in-
doors to warm it up. When the battery
has the correct temperature, it can be
used again. Use the battery in ambient
temperatures between -10°C (14°F) and
40°C (104°F).
Charge the battery.
Speak to your dealer.
Replace the fuse. Refer to
fuse on page 5 .
2. Set the power switch to OFF.
3. Remove the fuse cover (A). (Fig. 7)
4. Replace the fuse (B).
Product overview
To replace the
5